|
Post by dylan1306 on Jun 4, 2018 17:07:20 GMT
|
|
|
Post by TouchJams Support on Jun 6, 2018 13:32:09 GMT
Is the coin acceptor sending keyboard keystrokes?
|
|
|
Post by tonyneen on Jun 6, 2018 20:42:54 GMT
|
|
|
Post by tonyneen on Jun 7, 2018 6:58:50 GMT
Hi, if you are in the UK, i can send you some links to what i use, Money controls SR3 coin acceptor and Coinkit interface, i use these in a Comercial enviroment and the work 100%.
|
|
|
Post by dylan1306 on Jun 8, 2018 19:11:17 GMT
hi am from newcastle uk yeah all ive got is the coin acepptor taking coins and it seems to sending pulse ok to my muilty meater thanks mark
|
|
|
Post by tonyneen on Jun 8, 2018 21:07:28 GMT
I'm over in Cumbria, Touchjams needs to receive keystrokes to register credits, i dont know anything about the Arduino boards, so you will have to find out how to convert the ouput from your coin acceptor via the Arduino board, then map those keystrokes into Touchjams to allow credits to work. I use CoinKit software to do this, but your coin acceptor must have the CCTalk interface, watch the video in the link. jukeblaster.com/coinkit.html
|
|
|
Post by dylan1306 on Jul 25, 2018 20:08:28 GMT
hi m8ty what kind of coin accedptor do you have ive downloaded the software and ive got a new serial like on the video and my pc wont pick up the coin aceptor m8t
|
|
|
Post by tonyneen on Jul 25, 2018 21:47:09 GMT
Hi, i use a money contols sr3, but any cctalk type should work. I got mine from the website below, but i rang them as there were no coin acceptors on there website, great people to deal with, very helpful. maggielectronics.co.uk/Cheers Tony
|
|